PVC/PP/Pet Sheet Extrusion Production Line/Tile Extrusion Machine/Plastic Extruder

• Customization: Available
• After-sales Service: Lifetime Maintenance (Except Man-Made Damage and N
• Warranty: 1 Year
• Model NO.: TANZ-5
• Type: Sheet Extruder
• Plastic Processed: Pet/PP/PS etc...
• Product Type: Extrusion Molding Machine
• Feeding Mode: One Feed
• Assembly Structure: Integral Type Extruder
• Screw: Single-Screw
• Engagement System: Full Intermeshing
• Screw Channel Structure: Deep Screw
• Exhaust: Exhaust
• Automation: Automatic
• Computerized: Computerized
• Conditions of Use: 380V/3p/50Hz
• Production Raw Materials: Pet Pellets and Regularly Broken Pieces
• Sheet Thickness: 0.15-1.5mm
• Finished Sheet Width: 800mm
• Extrusion Output: 300-350kg/H
• Transport Package: Wooden or Standard Package PE
• Specification: Standard
• Trademark: TANZ
• Origin: Dongguan China
• HS Code: 84772090
• Production Capacity: 500 Sets of Sheet Line Every Year

Product Description

Product Description

120 EXHAUST SINGLE SCREW PET SHEET EXTRUSION PRODUCTION LINE
 

Project Overview:

1. Conditions of Use:	380V/3P/50Hz
2. production material:	PET pellets and regularly broken pieces
3. Sheet material thickness:	Thickness:δ=0.15-1.5mm
4.Finished sheet width:	800mm
5.Extrusion output:	300-350Kg/h

Device Configuration:

1	120/38 exhaust single screw extruder	1 set	Include	120 exhaust extrusion host	1 set
				Two-point automatic suction machine	1 set
				Host quantitative feeder	2 set
				Masterbatch feeding machine	2 set
				Vacuuming system	1 set
2	Hydraulic screen changer	1set	Include	Double column screen changer	1 set
				Hydraulic system	1 set
3	Melt metering pump	1 set	Include	Melt pump	1 set
				flow channel	1 set
				Pressure Sensor	3 set
				Cardan shaft	1 set
				Transmission system	1 set
4	Mold	1 set			1 set
5	Three-roller calender	1 set	Include	Three-roller calender	1 set
				Hydraulic system	1 set
6	Roller temperature control system	1 set		Three-stage roller temperature control system	1 set
7	Cooling shaping bracket	1 set			1 set
8	Waste edge trimming device + waste edge winding device (both sides)	1 set	Include	Waste edge trimming device	1 set
				Waste edge winding device	1 set
9	Silicone oil coating machine + dryer (double-sided)	1set	Include	Silicone oil coating machine	1 set
				Dryer	1 set
10	Traction device	1 set			1 set
11	Dual station winding machine	1 set			1 set
12	Electrical control system	1 set			1 set

Advantages of this machine:
1.The host screw adopts an exhaust-type single screw. Compared with twin screws, a single screw can reduce the viscosity drop of PET resin and better maintain the original toughness of the original sheet. The produced sheet has good toughness and good gloss.
2.The screw of the main machine is equipped with an exhaust device, which allows the raw materials to remove moisture from the raw materials in the barrel during the plasticizing process, reducing drying energy consumption, saving electricity, and producing better products and sheets with higher transparency.
3.The screw exhaust section of the main machine is equipped with a vacuum device, which can extract water more cleanly and ensure a lower rate of sheet defective products.
4.The front end of the extruder is equipped with an automatic material suction system, which can reduce manual feeding work and can automatically replenish materials.
5.The inlet of the main machine is equipped with a quantitative feeder, which can work synchronously with the main machine and feed materials simultaneously to avoid overhead situations caused by excessive feeding.
6.The host screen changer adopts cylindrical double-station. The cylindrical type has better wrapping and less material leakage.
7.The melt metering pump uses an imported pressure sensor in front of the pump, which can precisely realize the synchronization between the metering pump and the host machine.
8.The three-roller calender is driven by a servo motor, and the sheet forming rollers can be precisely synchronized with the host machine.
9. The traction device and the double-station winding machine are driven by servo motors. The winding machine is equipped with an automatic meter counting device. The winding size can be controlled synchronously with the host machine.
10. Control system: realize fully digital high-precision control.